Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
Open the pipe that needs to be connected to the detector and access the adapter. Connect detector with DC12V battery, turn on the power switch, and the detector starts to work.
In about 30s, the pipe will be filled with smoke. Please use head lamp if necessary. AUTOOL SDT 208 Car Smoke Leak Detector Features.[Professional EVAP Detection] In line with the technical requirements of the car repair shop EVAP test. The SDT208 can detect tiny leak holes up to 0.5mm and has a hold-limit pressure protection function in. EVAP mode, so as to protect vehicle pipes from damages. [Unique Design]The SDT208 is equipped with two pressure control modules, respectively, Standard Mode and EVAP Mode. And two independent switches (Air &Smoke), which can be used for a wide range of leak detection needs. Provided with three gauges includes Oil Level, Air Flow & Air Pressure for accurate data display. [Wide Range of Application]It supports 12V/24V car batteries.
For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats boats. Suitable for all car models.
[Operation Safety]The SDT208 owns high temperature protection and hold -limit pressure. During operation, if the equipment senses the temp. Above 75°C, the power supply will be automatically power off. If the air pressure exceeds the Standard mode (35psi) /EVAP mode (10psi), the air pump will stop working. This effectively ensures the safety of operators and equipment.
Standard Mode and EVAP Mode can NOT be turned on at the same time. When you use this AUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester for the first time, fill with 10ml oil. Please be careful NOT to beyond this range. The testing liquid : both liquid paraffin and baby oil are OK.Fresh oil can be filled with only when the smoke gets thin, and it can't be filled over 20ml each time. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly. During the process of leak detection, please keep away from smoke-sensitive parts.
Do NOT run the detector over 8 minutes continuously. The detector has a smart protector, during operation, if the equipment senses the temp. The round part of this detector has temperature, please be careful to avoid burns. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.1pcs AUTOOL SDT208 Car Smoke Leak Detector EVAP System Tester Main Unit. 1sets Hard Rubber Hose Plug (with serial specification). 1sets Soft Rubber Hose Plug (with serial specification).
1pcs Test Oil Refill Bottle(oil not included). If your package delayed few days, due to any unexpected factor, please wait patiently.Your kindly understanding and great patience would be highly appreciated! Please do not hesitate to leave us your 5 Star. Thank you for your kindness. We are reliable supplier to both wholesalers and retail sellers. And we are a professional Authorized dealers of. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
We supply many products on Automobile consumer. We have OBDII cars / Light Trucks / Heavy Duty Truck's. Battery Tester, Fuel Injector Cleaner Machine , Smoke Leak Detector Machine, Digital Circuit Tester, lgnition Spark Tester , Engine Timing Tool. And much more others products.
Wish we can solve the problem peacefully. We will reply you within 12 hours and do our best solve the problem with you Except on Weekends and. The item "EVAP Car Heavy Duty Truck Smoke Machine Pipe Smoke Leak Detector Diagnostic Tool" is in sale since Friday, November 22, 2019. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Diagnostic Equipment & Tools\Other Diagnostic Service Tools". The seller is "beherenow177" and is located in Shenzhen.
This item can be shipped worldwide.